Welcome to UK420

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!

This message will be removed once you have signed in.


Sign in to follow this  
Followers 0
mart

Can You Make Oil Usuing Just Kief?

16 posts in this topic

Over the last few months i have gathered a lot of kief using my crystal catcher and have made hash using various methods which turned out quite well, but was wondering if there is anyway of making oil using just the kief?

One of the methods i used to make hash doesn't seam to have been mentioned in any of the forums:

Heres a brief discription (i shall post some pics over the next few days to help explain better!)

ONLY TRYED WITH MAYBE 2GRAMS OF KIEF AT A TIME!!!

Collect kief using a crystal catcher.

Turn on oven to 180 ish.

Take cellophane off a 10 pack of fags and fill

Work this round at bottom of cellophane then roll up into a sausage shape then sellotape closed.

Take a sheet of newspaper and rip a length about 4" wide.

Roll up the kief pagage in the newspaper and fold boths end to close the pagage and cellotape closed.

Next soak the package in water. make sure its very wet (kief is protected so really soak it untill the paper is all wet)

Place on small baking tray in top of oven.

Leave 10 mins....

Remove from oven and use rolling pin appling as much pressure as possible to compact to package (keep turning)

Do this for as long as you can (maybe a couple of mins)

Place in freezer to cool down for 20 mins.

Unwrap (you will need scissors)

You should have a small peice of hash, dark in colour like it should be and smokes a treat.

If you don't end up with a dark hash i think it's down to not being in oven long enough or 'rolling pined' enough.

Hope you enjoy!

Share this post


Link to post

yes you can just use kif to make oil

Share this post


Link to post

Thanks for the reply.

How much will i need and what method would be best??

Share this post


Link to post

What I would do is use some iso alcohol and use this to dissolve the hash in.

You won't need a lot, just add a few ml at a time until all the hash is dissolved.

Leave the alcohol to evaporate and then you will be left with oil.

How much oil depends on how much hash you start with.

Share this post


Link to post

Hi mart

well the way i would do it would be the B.H.O run

and the amount of oil you get is all about the quality of the kiff

say 14g of kiff will give you a few grams of oil

Share this post


Link to post
Hi mart

well the way i would do it would be the B.H.O run

and the amount of oil you get is all about the quality of the kiff

say 14g of kiff will give you a few grams of oil

BHO run with the trim surely??

Share this post


Link to post
Hi mart

well the way i would do it would be the B.H.O run

and the amount of oil you get is all about the quality of the kiff

say 14g of kiff will give you a few grams of oil

BHO run with the trim surely??

i dont B.H.O trim me :no:

only buds or kiff :spliff:

Share this post


Link to post

HMT, please can you tell us how you BHO your kiff? :wink:

Share this post


Link to post

Thanks for all the replys.

I shall save some more kief and have a go.

Do i put the alcohol in a dish or one of those cafatierre coffee pot things?

Sorry for all the questions but i don't want to waste good kief by getting it wrong.

Share this post


Link to post

Hi fresh

i just use i pipe same as most peeps i got the 3 pipe one from a certain web site

the trick is dont pack the tube to tight :wink: or better still pack it with buds and kiff :yep:

if you use good quality bud in your tube you could end up with budder or paste at the end :smoke:

Share this post


Link to post
Hi fresh

i just use i pipe same as most peeps i got the 3 pipe one from a certain web site

the trick is dont pack the tube to tight :yep: or better still pack it with buds and kiff :smoke:

if you use good quality bud in your tube you could end up with budder or paste at the end :ninja:

Thanks for that HMT :wink:

Share this post


Link to post

also adding extra coffee filters on the bottom of the tubes also helps keeping it nice and clean :wassnnme:

Share this post


Link to post

I personally don't see the point in oiling kief/resin powder. If it is a decent quality resin powder then you will only be changing it very slightly. Depending on the amount you are using, you are likely to to lose a bit in the process, making the whole process uneconomical. If you've already got resin powder, I'd say just press that up into hash. When oiling it, you are only getting rif of the actual resin heads themselves which are a negligable proportion.

If you do decide to have a go then it doesn't really matter what method you use, however, a coffee pot or something similar is most likely to be the most economical. If you think basically that you have a powder which you are trying to remove the outer casings of. Powder is very fiddly to work with, plus you are working with small quantities (unless you are lucky enough to have loads of resin powder), so a container in which you can sit it all to steep before pouring through a filter will be best. In a tube you will have lots of excess space and the gas/liquid butane will blast straight through, blowing around all the powder in the process. The main component however is the filter used after the resin has been exposed to the butane. This is where you'll extract the casings in which the resin resides. The oil will be dissolved in the butane and any remaining solids will be the resin heads themselves which you want to filter off using paper coffee filters.

Like I say though, if you have the resin powder extracted already then I see that as the end of the road and you want to then concentrate on the cannabis you removed that resin from for oiling rather than the resin itself.

:guitar:

That's just my view though.

Share this post


Link to post

Thanks for the advice 'grobag'

I smoke quite a bit so get a good quantity of kief to play with.

I have already made various types of hash and enjoyed the different 'smokes' and now want to make oil so i can mix it with some dry kief and make a different sort again.

I won't be doing another grow for a while so won't have the 'trash' to make the hash but do have plenty of kief so why not experiment.

Any other ideas are always welcome..

Share this post


Link to post
What I would do is use some iso alcohol and use this to dissolve the hash in.

You won't need a lot, just add a few ml at a time until all the hash is dissolved.

Leave the alcohol to evaporate and then you will be left with oil.

How much oil depends on how much hash you start with.

you will need a lot more than a few ml's. i made a thread asked the very same question about a month ago

Edited by E C S

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0