cypo74 Posted February 23 Share Posted February 23 Just spoke with ac infinity, they are planning on releasing a uk version of the control plug but no release date yet Link to comment Share on other sites More sharing options...
Military Grade Posted February 23 Share Posted February 23 On 06/11/2023 at 23:20, Slippy One said: Does anyone use this ALL button? Never again I'm just glad I noticed I had pressed and what it did or it could have been a right spanner in the works. 1 Link to comment Share on other sites More sharing options...
Flamedodger Posted February 24 Share Posted February 24 10 hours ago, cypo74 said: We need an innovative sparky in the uk to release one Have a look at building a HomeAasistant server. There are ACI integrations which will let you do this. I have my 67 controller working my heater and dehumidifier plugs 3 Link to comment Share on other sites More sharing options...
cypo74 Posted February 24 Share Posted February 24 (edited) 5 hours ago, Flamedodger said: I have my 67 controller working my heater and dehumidifier plugs Thanks for that mate, very handy to know….. I’m on it which soil sensors are you using? All the vids I’ve watched before said they are pretty finicky Edited February 24 by cypo74 Link to comment Share on other sites More sharing options...
Flamedodger Posted February 24 Share Posted February 24 7 hours ago, cypo74 said: which soil sensors are you using? All the vids I’ve watched before said they are pretty finicky They are Ecowitt sensors, other than the battery going flat have been sound and pretty reliable. I keep the soil between 20-40%. Next project is to get a watering system and get them to work some irrigation 1 Link to comment Share on other sites More sharing options...
cypo74 Posted February 24 Share Posted February 24 @Flamedodger are you running this on a raspberry pi? think this may be a bit above my computer skills been reading for a while and it seems I’ve got to drop in bits of code, it’s like reading Chinese to me 1 Link to comment Share on other sites More sharing options...
cypo74 Posted March 4 Share Posted March 4 S6 with 69pro controller delivered today lets see how much of a mess I can get in setting this up tomorrow 4 Link to comment Share on other sites More sharing options...
Shumroom Posted March 4 Share Posted March 4 Just do all the setup on the app, it should be fairly straightforward Atb 3 Link to comment Share on other sites More sharing options...
Military Grade Posted March 5 Share Posted March 5 I attempted to try and use the buttons on the device once, Never again , App all the way 3 Link to comment Share on other sites More sharing options...
cypo74 Posted March 5 Share Posted March 5 (edited) Well it’s all up and running fairly painlessly unfortunately the control led dio tech doesn’t work with the type a cable, may give the type b a go? to be fair, control led said it should work but they don’t know still trying to work out how to set min fan speed, then it’s on to setting day and night temps using the fan as I can’t connect my heaters yet Edited March 5 by cypo74 2 Link to comment Share on other sites More sharing options...
Shumroom Posted March 5 Share Posted March 5 You set the off speed(on manual settings) as the minimum speed once on auto iirc Hope this helps. Atb 1 Link to comment Share on other sites More sharing options...
cypo74 Posted March 5 Share Posted March 5 (edited) Cool, got the min temp set now Got max speed running at 5 and min 1 set on auto max temp 29 min temp 24 no humidity triggers set not sure why the fan is running at 5 while temps are still low at 23 edit: pressed lots of buttons and it is now running at the low speed toggled from auto to off a few times until it started working Edited March 5 by cypo74 Link to comment Share on other sites More sharing options...
Shumroom Posted March 5 Share Posted March 5 Turn off low temperature trigger Atb 1 Link to comment Share on other sites More sharing options...
Shumroom Posted March 5 Share Posted March 5 These controllers(or at least the software) were originally designed to keep bitcoin mining rigs at the ideal conditions. So some of the functions are not as straightforward as if it were designed originally for our use Atb 1 Link to comment Share on other sites More sharing options...
cypo74 Posted March 7 Share Posted March 7 (edited) Well fan speed 1 is clearly not enough, had water running down the walls thismorning from the humidity from the mist maker id turned off the humidity trigger to stop the fan being triggered every 5 mins, the plants are only 4 nodes high and turning on the circulation fan sent the environment crazy, humidity shooting up way past the inkbird setting going to recalibrate the inkbird tonight as I think that’s way out, tested 4 different humidity meters and they were all different noticed that sometimes when you make adjustments the new settings don’t trigger the actions, have to toggle the temp or humidity triggers on and off a couple of times until it’s locked in properly Edited March 7 by cypo74 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now