Jump to content

Butane Honey Oil


grobag

Recommended Posts

Thanks for the info  @potato1356 :yep:

 

I have several variable decent mods & batteries & tanks, but I think a dripper would be better to clean etc. but I can't be arsed with that if I don't have to.

 

I don't know what a c-cell is though, so could you elaborate please mate.

 

When I said 80℃ I meant the water used in a saucepan under low gas heat, then a glass inside that with the shatter & prop g. I am using about a 1g to 7ml of prop g, then heating & mixing for 20mins until all mixed.

 

My latest batch is better, golden and strong, my last batch went dark, because I washed it with ISO to collect it, but I won't do that again as it almost ruined it. But it clogs my atomizer after about 1/2ml is done, where little vape comes out after that. 

 

I don't want to use peg , as I've heard nasty reports about that, even though it mixes with the oil better apparently.

 

I look forward to the results of your trial mate, as you clearly know your stuff :punk:

  • Like 1
Link to comment
Share on other sites

12 minutes ago, AKPOG said:

Thanks for the info  @potato1356 :yep:

 

I have several variable decent mods & batteries & tanks, but I think a dripper would be better to clean etc. but I can't be arsed with that if I don't have to.

 

I don't know what a c-cell is though, so could you elaborate please mate.

 

When I said 80℃ I meant the water used in a saucepan under low gas heat, then a glass inside that with the shatter & prop g. I am using about a 1g to 7ml of prop g, then heating & mixing for 20mins until all mixed.

 

My latest batch is better, golden and strong, my last batch went dark, because I washed it with ISO to collect it, but I won't do that again as it almost ruined it. But it clogs my atomizer after about 1/2ml is done, where little vape comes out after that. 

 

I don't want to use peg , as I've heard nasty reports about that, even though it mixes with the oil better apparently.

 

I look forward to the results of your trial mate, as you clearly know your stuff :punk:



A dripper would be a pain to dose mind! 

c-cell is just the name of the cartridge - search it and see the images :) 

80ºC is crazy high to mix in quality shatter as all your terps will boil off. 

1:7?!?! it should definitely dissolve then, even at 30ºC....

yes agreed PEG is nasty shit! look at ketone oils - many benefits....

  • Like 3
Link to comment
Share on other sites

15 hours ago, potato1356 said:

Exoddus sativa pheno live resin - 

large.41496114_274577466509648_6883761380579606528_n.jpglarge.41515054_235093303845724_7858882693809831936_n.jpg

Delicious, with intense body buzz! 
 

 

 

:notworthy::notworthy::notworthy:

 

I need to up my shatter game.......my BHO wont look at the pictures as its embarrassed 

Link to comment
Share on other sites

10 hours ago, zen-ken said:

 

 

:notworthy::notworthy::notworthy:

 

I need to up my shatter game.......my BHO wont look at the pictures as its embarrassed 


I'm still only a beginner, and we all start somewhere - first batch I ever did back in the day I had no clue so I blasted into a pyrex dish without even parchment paper, didn't collect it as it gassed off and ended up scraping the tray for a about a week trying to get it back out :rofl: 

What kind of setup do you have? I may be able to suggest some simple changes or little additions that may make a big difference :) 
 

  • Like 1
Link to comment
Share on other sites

@potato1356

Im still using a honey bee extractor and a pyrex dish .....purging with a vac chamber and heat pad.

I found a good flea bay site with all the toys you have in your arsenal and will be investing very soon.

 

I have a light leak problem in my space to solve first, I just had to replace all the fans and prop tent and still need to replace my main tents so the coffers are a little empty at the moment.

 

I will definitely take you up on your offer tho when ready and thank you very much.

 

Edited by zen-ken
  • Like 2
Link to comment
Share on other sites

10 hours ago, zen-ken said:

@potato1356

Im still using a honey bee extractor and a pyrex dish .....purging with a vac chamber and heat pad.

I found a good flea bay site with all the toys you have in your arsenal and will be investing very soon.

 

I have a light leak problem in my space to solve first, I just had to replace all the fans and prop tent and still need to replace my main tents so the coffers are a little empty at the moment.

 

I will definitely take you up on your offer tho when ready and thank you very much.

 


ooofff thats not a cheap set of replacements - I feel ya brother. 

Well I just found out my 2.4 x 3.6 brand new bud box, my rdwc system with 80L totes, a 12" isomax used for only 3 months, and a 12" carb o air 100mm thick carbon filter all just got seized because some absolute DILDO got skitzy about having it in his gaff temporarily (even though it was boxed for fucks sake), and hid it in a stolen van - that then got impounded by police. 

so fuck my life - gotta find money for another 12" extraction set, and a new tent - ARGHHHH.

I'd say get the most from your open blast arrangement before making the jump to closed loop - open blasting can produce amazing results - just use the purest gas you can. 

Good luck fixing the issues! 
 

  • Like 2
Link to comment
Share on other sites

41 minutes ago, potato1356 said:


ooofff thats not a cheap set of replacements - I feel ya brother. 

 

 

 

Its cost me my latest crop as well.....im hoping this wont sink me.......its cutting it very close 

Link to comment
Share on other sites

Hi folks, can anyone recommend a vape pen and method to creating my own e liquids. Up till now ive been using EJmix to add concentrates too with not much success. My mix of 1g of concentrate to 1ml EJ seems to be ok to start with but then the mix seems to darken and the taste goes to shit.? :skin_up:

 

Link to comment
Share on other sites

3 minutes ago, Dr feelgood said:

Hi folks, can anyone recommend a vape pen and method to creating my own e liquids. Up till now ive been using EJmix to add concentrates too with not much success. My mix of 1g of concentrate to 1ml EJ seems to be ok to start with but then the mix seems to darken and the taste goes to shit.? :skin_up:

 


Which exact cartridges are you using? If it's a wick system then that's your issue.....

 

  • Like 1
Link to comment
Share on other sites

Just now, potato1356 said:


Which exact cartridges are you using? If it's a wick system then that's your issue.....

 

I am using a wick system, ive tried load of different types all purchased from local stores but all leak and only work for a short while. can you recommend anything?

  • Like 1
Link to comment
Share on other sites

14 minutes ago, Dr feelgood said:

I am using a wick system, ive tried load of different types all purchased from local stores but all leak and only work for a short while. can you recommend anything?


This is a very common story - regular vape gear generally speaking just doesn't cut it for canna....

C cell cartridges are the best for pull and flow rate - meaning you don't rinse terps/pg/whatever liquid you're using a base faster than you go through the extract - so you don't clog or burn your cartridge or more importantly - your meds. 

I'm about to test 5 new models brought out from the same people that innovated the brass knuckles distillate system and multiple other mouth to lung modules - so the tech is always advancing for sure - right now for availability and ease of use the c cell is a clear winner for me - high quality and low profile cartridge - neat and efficient.

run it on the lowest power cheap e-cig battery going - I love the 50p batteries - nothing makes em run better! 

CE4 or EVOD batteries are best, or an innokin tc100 if you need insane variability and battery life. 

hope this helps! :oldtoker:

  • Like 4
Link to comment
Share on other sites

Live resin diamonds and terp sauce - post cryo (2 days in dry ice in freezer then a further 4-5 days in freezer).

large.42045487_245342006174997_3643636484814143488_n.jpglarge.41880615_314743829259585_439053457035362304_n.jpglarge.41982662_514426315693206_9151621069122043904_n.jpglarge.41928423_254784141845690_5634072905584214016_n.jpglarge.41878306_2293714867366738_7740617049872793600_n.jpg

large.41927496_523460591401380_2110485386668015616_n.jpglarge.41900369_1000934646753706_6930551896763531264_n.jpglarge.41816467_2137383746478067_8539509262173339648_n.jpglarge.41841672_1135025736646375_2893517345601355776_n.jpglarge.41824634_692688697763405_6001403479677992960_n.jpglarge.41822534_691949534516907_4159613080998772736_n.jpglarge.41827754_969189349931336_5809654905266241536_n.jpg

Lots of diamonds are up near the viewing window as the mine was on it's side in the dry ice....

very easy to collect later so no problem. 


Now to sit the mine at room temp for 2-3 days and see what the pressure hits, then get it in a water bath at 28ºC for a further 3-4 weeks.... 

The real diamond building happens at higher pressures, so looking forward to picking out marbles by the end! 

 

Edited by potato1356
  • Like 13
Link to comment
Share on other sites

That's some seriously nice shit done in a seriously scientific way mate! Well done indeed sir:realcool: 

 

I wish I had the balls & knowledge to do that, as I want to get into concentrates for the potency required to help my chronic pain.

 

I must check out your diaries on the subject mate, as I'd love a setup like that if it doesn't cost too many beans :yinyang:

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy Terms of Use