Shumroom Posted January 25, 2023 Share Posted January 25, 2023 This is not a guide ********Please don't just copy me!!!******** I'm just copying others Hello there, I hope you're comfortable, make sure you have a joint handy or have filled your favourite vape ready with some fine herb I don't claim to be a master hash maker. I am learning in public, hopefully I'll be able to produce some top shelf hash right from day 1, but I suspect that might not happen Much more likely I will get something usable the first time around, hopefully making improvements over time as I gain experience. I've previously used a hand shaken hash making tubs, you've probably seen them, they're about the size of a big tin of dog food. Loads of work to get a poor result. I think I've still got a wee pollen press somewhere, but that won't be used this time, unless I'm mistaken I have dabbled with solvent extraction, my favoured methods are to make QWISO or Canna-butter/coconut oil. It's been a while since I last made BHO so I might have a go at that again at some point, i've got some good gas stashed away But this time around I'm having a go at making my first run of BubbleHash. I had hoped to have the hose on my portable washing machine replaced before doing this but that hasn't happened yet, so this was just mixed by hand I've got a 5 bag set of 5 Gallon Bubblebagdude bags(other brands are available), 220 micron 160 micron 120 micron 73 micron down to 25 micron. After filling the bottom of a 30l bucket with some ice, then emptying 4 small paper bags full of mixed quality leaf trim(some sugar leafs absolutely covered in trichomes and some larger fan leaves with less coverage) which had been in the freezer over a week. I then added some of my very cold tap water and then another layer of ice on top, followed by a bit more water. I stuck the lid on and rolled myself a spliff to smoke whilst waiting on everything becoming cold and wet. I had already stacked the bags in the bucket in order from smallest in first, working up to the 220 micron bag last of all. I know you can only see two bags but trust me there are 5 I forgot to say that for ice, i half filled(approximately) some takeaway tubs with council pop and froze them up, then chucked the ice pucks into a freezer bag and refilled the tubs a couple of times. Here's the contents of the bucket just before I started mixing it up. Next after mixing for about twenty minutes I grabbed most of the ice out of the bucket and put it into a spare bucket, then I poured the remaining contents into my Yellow bucket as seen above. When I started pulling the first bag I was mildly disappointed. But then I remembered that this bag wouldn't be the best quality, so I don't really want to see a lot in this 160 micron first pull. This is the same 160 micron 1st pull, but now it's a little drier(about an hour later maybe). This is just a closer look at the 160 micron. This his is the 120 micron 1st pull Same 120 micron 1st pull after drying out a little. Here's a close up of the same 120 micron 1st pull. Here's the 120 micron on the left and 160 micron on the right for comparison. Next up is the 73 micron bag before scraping with my non serrated butter knife. 73 micron 1st pull. 73 micron 1st pull after drying out somewhat. A little closer up of the 73 micron 1st pull(I'm not sure how that bit of leaf got in there, it was easily removed). This is the 73 micron and 120 and 160 micron first pull for comparison. Now we're getting down to the last bag, it's the 25 micron bag this time. This is a slightly different image to the one above but I couldn't see properly at this time(when editing my photos). The 25 micron 1st pull after losing some of it's moisture. 25 micron 1st pull close up. The 25 micron at the top, with the 73 micron on the left bottom, 120 micron bottom middle and the 160 micron on the bottom right. Here's the same as above but just after some drying has occurred The the material in the 30l work bucket was topped up with a little extra water to make the mixing a little easier, i didn't need to add anymore ice. I gave the bucket another 20 minutes or thereabouts or mixing this way then that way, getting some good cyclone action going in each direction. So by this time I had too much water in my work bucket to be able to pour it all into the Yellow bucket, the bags had magically become stacked in order again So I poured roughly half the contents of the work bucket into the bags again. This is 160 micron pull 2 This is 160 micron pull 1 on the left and pull 2 on the right for comparison. Next up it's the 120 micron 2nd pull ************some images missing************ This is the 25 micron bag on the 2nd pull before gathering. 25 micron 2nd pull. This is how things looked by the time I'd finished the second pull of the bags. This is how things looked after the 3rd pull of the bags. For clarification, there was no mixing of material in between pull 2 and 3 of the bubblebags. Pull 3 was because my work bucket was a 30l bucket and the bubblebags are 5 gallon(20 litres), so I did half at a time. The hash can sit overnight before I start messing about with it, i'll be breaking it up to allow as much water to evaporate as possible. I hope you enjoyed watching my first BubbleHash run I'll update with more pictures as the hash dries and then eventually gets rolled. Comments and criticism equally welcomed. Atb @Revive 41 1 Link to comment Share on other sites More sharing options...
Revive Posted January 26, 2023 Share Posted January 26, 2023 @Shumroom looking good mate..you got a decent return there tbh.. what was you mixing it up with dude? I used a paint mixing paddle in a drill first but feel i got a cleaner run when I mixed it by hand hopefully the hose comes soon and you can get the washer up and running, at least it will take some of the work out of it Good stuff brother 5 Link to comment Share on other sites More sharing options...
Shumroom Posted January 26, 2023 Author Share Posted January 26, 2023 Cheers @Revive I just used my old wooden porridge spoon for mixing by hand It was a pain in the ass and lower back But it did give me full control over the amount of energy that I was putting in to it. The hose for the washing machine can take it's time getting here now, It'll take me a wee while to collect enough trim to be worth running. Although now I've got most of the equipment and half an idea what to do, I might just have to try hashing an entire plant next time, after freezing the whole thing at the time of harvest. I forgot to mention previously that I have kept a hold of the wet trim from this hash run, for making some cannabutter from it. Atb 10 Link to comment Share on other sites More sharing options...
KC Posted January 26, 2023 Share Posted January 26, 2023 Looks good buddy! When I had my washing machine kit (it came with some bags that are long dead now) it came with a metal sieve. I use the back of a tablespoon to push the resin glands through the sieve, they come out like a nice fluffy brown sugar. It seems to really help the drying process I find. Just a thought 9 Link to comment Share on other sites More sharing options...
M Pamplemousse Posted January 26, 2023 Share Posted January 26, 2023 (edited) @Shumroom Top job. I've yet to replace my hose and tbh I've not found any issue. I just flush with lots of cold water. I agree it is best practice to have smooth and I will eventually change it but it's not critical imo. Fresh frozen for the win! It's worth the effort. Edited January 26, 2023 by M Pamplemousse 6 Link to comment Share on other sites More sharing options...
OldFord Posted January 26, 2023 Share Posted January 26, 2023 @Shumroom Looking mighty fine sir Will be following along Feeling the pleasure and the pain , hash is one of the little pleasures in life for me .... or was ! Cant smoke and eating its a waste So i will be following along , salivating & dribbling on the keyboard with the thought of smoking it ... whilst kicking the cat in temper as i cant smoke it ! 5 Link to comment Share on other sites More sharing options...
Gaijin Posted January 26, 2023 Share Posted January 26, 2023 I've never smoked bubble hash, can't wait to try this for myself. Doesn't look too complicated, even for me 4 Link to comment Share on other sites More sharing options...
KC Posted January 26, 2023 Share Posted January 26, 2023 Oh is leave it a lot longer than 24hrs before you touch it mate. Mine can take 2 days and that's running it through the sleeve and sitting it on kitchen towel with paper on top. It's shit when it's pressed to early, my mate did it and it will never dry properly after its been pressed. 4 Link to comment Share on other sites More sharing options...
Guest Posted January 26, 2023 Share Posted January 26, 2023 Looking tasty there . Link to comment Share on other sites More sharing options...
Flamedodger Posted January 26, 2023 Share Posted January 26, 2023 Looks lovely 2 Link to comment Share on other sites More sharing options...
BilgePump Posted January 26, 2023 Share Posted January 26, 2023 Banging first attempt dude Well done mate. 1 Link to comment Share on other sites More sharing options...
Shumroom Posted January 26, 2023 Author Share Posted January 26, 2023 6 hours ago, KC said: Looks good buddy! When I had my washing machine kit (it came with some bags that are long dead now) it came with a metal sieve. I use the back of a tablespoon to push the resin glands through the sieve, they come out like a nice fluffy brown sugar. It seems to really help the drying process I find. Just a thought Thanks Did you not loose some of the hash in the seive? Or did you just bash it with a spoon to release it? 5 hours ago, M Pamplemousse said: @Shumroom Top job. I've yet to replace my hose and tbh I've not found any issue. I just flush with lots of cold water. I agree it is best practice to have smooth and I will eventually change it but it's not critical imo. Fresh frozen for the win! It's worth the effort. Mercury buckets, sorry autocorrect merci beacoup When I was gearing up for this I was watching some Frenchy Cannoli RIP, but yootoob threw up a video about changing the hose, so I ordered one and the diameter was too small, even after heating it in hot water. By this time I had cut the original hose off, so I was committed to replacing it Fresh frozen, this is one more reason I need to get my yields up on my growing 4 hours ago, OldFord said: @Shumroom Looking mighty fine sir Will be following along Feeling the pleasure and the pain , hash is one of the little pleasures in life for me .... or was ! Cant smoke and eating its a waste So i will be following along , salivating & dribbling on the keyboard with the thought of smoking it ... whilst kicking the cat in temper as i cant smoke it ! Much appreciated, I know that you've probably been around long enough to have seen it done well and poorly. I appreciate that you can no longer partake in combustion or vaping but at least you know that you're medicine has been grown with the care and love it deserves. You doing your best squishy face impersonation? I hope you have a water resistant keyboard I'm looking forward to getting my hands on it once the rolling process begins, then I should start to get an idea of the smells from it. Leave the cat alone 2 hours ago, Gaijin said: I've never smoked bubble hash, can't wait to try this for myself. Doesn't look too complicated, even for me If you can set up the the kit you've got going, then you'll have no problem with it It's been a while since I last had some bubblehash, people don't go around offering up this quality of hash in my world 2 hours ago, KC said: Oh is leave it a lot longer than 24hrs before you touch it mate. Mine can take 2 days and that's running it through the sleeve and sitting it on kitchen towel with paper on top. It's shit when it's pressed to early, my mate did it and it will never dry properly after its been pressed. No worries, when I mentioned messing around with it today, I just meant that I'd be going over it with a knife/razor blade just to expose as much of the interior as possible to help with the drying process. One of the last things I'd want after the time and effort, would be a piece of mouldy hash in six months time 2 hours ago, B-real said: Looking tasty there . Thank you 14 minutes ago, Flamedodger said: Looks lovely Thanks Just now, BilgePump said: Banging first attempt dude Well done mate. Cheers buddy. Thanks very much to all of you for the kind words I'm off to have a look at the hash again before I make myself some food Atb 7 Link to comment Share on other sites More sharing options...
KC Posted January 26, 2023 Share Posted January 26, 2023 1 hour ago, Shumroom said: Did you not loose some of the hash in the seive? It does leave a bit, same with the bubblebags though. It's pretty good reallyas the next time you come to make it there is already some in there. I usually get a good gram or two from the bubblebags, it's like a little bonus before your next run. 1 Link to comment Share on other sites More sharing options...
Shumroom Posted March 3, 2023 Author Share Posted March 3, 2023 I still haven't done anything(sample or process) with the hash I made. I'm planning to do another run next week. This time it will be with the washing machine, as I believe I've now got the right size hose for it Atb 3 Link to comment Share on other sites More sharing options...
Shumroom Posted April 18, 2023 Author Share Posted April 18, 2023 If I write it here I'm committing myself to get something done There are now 2 paper bags of trim in the freezer I've made a load more ice slabs. I'll have a look at attaching the new hose to the machine tonight. Atb 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now