The Villan Posted March 25 Share Posted March 25 (edited) Thanks to @Seedstockers-Mark for the opportunity to grow these out. Hopefully I will portray them to the best of my abilities. As per usual I will be in BioBizz Light mix and using the BB Grow and Bloom with an adding of Epsom Salts along the way. Following OT1'S guide all the way this time. Seeds went in to a prop tray inside an electronic prop this morning at 10am. The props had been prepared and ran for 24 hours to check on temps and humidity levels. No lights on as yet, I will run one of the Par Ultras as soon as I see signs of life. I will be aiming for about 150Umols once the seedlings appear. So onwards and upwards as they say. Just like to offer my sympathies to @brock1 due to his current position. The temp is 23.5, the 21 showing on the second pic is when the device was taken out of the prop for photographs Edited March 25 by The Villan 7 Link to comment Share on other sites More sharing options...
HazyDaze Posted March 25 Share Posted March 25 Have a good one brother vill 2 Link to comment Share on other sites More sharing options...
The Villan Posted March 25 Author Share Posted March 25 Cheers @HazyDaze love the avatar brings back fond memories :) 3 Link to comment Share on other sites More sharing options...
HazyDaze Posted March 25 Share Posted March 25 The 'lung' is still burning from those fukkas isn't it dude 2 2 Link to comment Share on other sites More sharing options...
The Villan Posted March 25 Author Share Posted March 25 Had a Galleano bottle and bone handled wide knices stashed in a few places m8. The local boozer was one place, behind a secret door under the seats, on lock ins we were allowed to get them out. The other was in the kitchens I cheffed in back in the 80's. 7.30 am most mornings and the kp's and waitresses and waiters would stand in a line behind the big 8 burner cooker always a happy ship we sailed in :) 2 2 Link to comment Share on other sites More sharing options...
The Villan Posted March 25 Author Share Posted March 25 (edited) I forgot to add something to the original post...... Femmed seed again, because I am away for a few months I cannot save clones etc. I need to get a grow on asap when I get home and femmed seeds are a good choice to get a quick fill of the jars. I have quite a few subbies seeds I want to try out, they will be sown somewhere into this grow. I will deffo be keeping my eyes open for any more Chelato drops from @4kali because we are smoking it as I type and it really is a nice cheesy smoke Edited March 25 by The Villan 4 Link to comment Share on other sites More sharing options...
Shumroom Posted March 25 Share Posted March 25 Good luck with the grow Hopefully these will be tasty bits of gear once flowered out I’m following along. Atb 1 Link to comment Share on other sites More sharing options...
The Villan Posted March 28 Author Share Posted March 28 Just been up to check on the Ladies and I have signs of life. tap roots poking out the bottom and 3 have popped their heads above the root riot cubes. Have stuck my bivvy light on top of the prop until they are properly up. So about 50 hrs for first signs of life 4 Link to comment Share on other sites More sharing options...
Shumroom Posted March 28 Share Posted March 28 And they’re off Atb 1 Link to comment Share on other sites More sharing options...
The Villan Posted March 28 Author Share Posted March 28 Well what a difference 6 little hours make all but two are above ground, one of them that isnt above ground does have a tap root though, the last one no shows of anything. Have removed the cover of the prop now, will check in a few hours to make sure everything is hunk dory. I have switched extraction on and the cloudray, non oscillating mode and lowered the light down until I got a reading of 110 umols, will increas when they have become a little more robust. I am pulling 80watts at the wall, thats with the light, extraction and fan and pro on. Not to bad, the missus says that will do 10 Link to comment Share on other sites More sharing options...
The Villan Posted March 29 Author Share Posted March 29 Been over in the lighting section and read an old post about distances etc etc. Found upt I was to low with the ppfd so have left the light where it is and turned up to half power and am getting 235 ppfd now Watts from the wall is now 139 with everything running. 6 Link to comment Share on other sites More sharing options...
OldFord Posted March 30 Share Posted March 30 All the very best with them mucker They do look like they produce some tasty nuggets ! In particular the TropicalZ looks right up my street , seems to het some nice feedback too. Looking forward to seeing the flower show Vil 3 Link to comment Share on other sites More sharing options...
The Villan Posted March 30 Author Share Posted March 30 (edited) 1 hour ago, OldFord said: All the very best with them mucker They do look like they produce some tasty nuggets ! In particular the TropicalZ looks right up my street , seems to het some nice feedback too. Looking forward to seeing the flower show Vil Thanks @OldFord am interested in where you found any informtion on them ? Have messages Mark but he seems to have gone awol E2A what a donut I am..... seedstockers website Edited March 30 by The Villan 1 3 Link to comment Share on other sites More sharing options...
The Villan Posted March 31 Author Share Posted March 31 Well and truly on their way now. 100% germination. 7 Link to comment Share on other sites More sharing options...
The Villan Posted April 3 Author Share Posted April 3 Good evening, 9 days after going into the cubes it's time for the first pot up. Plants looking ok and I have swapped to the Root It 42 Watts LED lights 2 of them. Am crtainly missing the extra 3 or for feet of extra space from my outdoor shed, but I aint getting cold and wet having to go outside, plus easier for me to check on the plants, although two flights of stairs is a pain in both me knees and ankles Stems are nice and rigid, they have been getting 2.5 ml per 1/2 ltr of water of Formulex. Have just potted up and wet in with the same water. I used the Uni T device and wow I was surprised, then I realised I hadnt changed the setting from 3500k with red. Put it to 6500k white led and the readings were a lot better. Plenty of rootage and the width of the main leaves were wider than the cube so was time to give them a new intermediate home. I may put them back in the heated prop tomorrow minus the lid because I can't justify having the skinny mat on with only a few plants in there. Will see how it looks in the morning once the matt has warmed the soil in the probe pot, only thing is having to put them in the prop base means they wont get as good a light distribution as they are now . Rambling over cause the second half has just kicked off......COTV......few pics to finish off with 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now