awesomesauce Posted April 13, 2023 Share Posted April 13, 2023 I bought a new tent as starting to grow indoors again, I bought the Secret Jardin ds150w as used to have a dr90. I noticed the long tent poles they join in the middle with a connector and when I hang my carbon filter from the pole it pends significantly in the middle. Any advice on what I can do about that? I was thinking of trying to get a strong pole or maybe running a wooden support and cable tying the wood to the pole. Seems pretty rubbish for the pole to be pending so much though. The secret jardin tent was quite a mission, I had to cut the holes and order additional parts before I could use it properly. At least it is much more air tight than the DR90 was with its pre made holes. Link to comment Share on other sites More sharing options...
badbillybob Posted April 13, 2023 Share Posted April 13, 2023 my advice, get a speaker stand, and put filter upright on top of it. with filter on top etc, ducting out of vent siock. bungee it to a corner pole. Link to comment Share on other sites More sharing options...
awesomesauce Posted April 14, 2023 Author Share Posted April 14, 2023 OK thanks for the suggestion, I didn't think of doing that. I was planning on using a HPS with a air cooled reflector (which I had from like 10 years ago) so not sure how I could use that with that stand. Maybe if I put it on the right side of the tent, then through the air cooled reflector and then out the sock on the left. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now