skorpio777 Posted February 15, 2018 Share Posted February 15, 2018 (edited) as some of you may allready know im a complete noob and not so bright in understanding all the slang and abbreviations regarding growing ( please make reply simple and to the point ) so, i need answers really to what to buy , im using 10 pot x 6 litre wilma hydro system inside a 1.5x1.5 tent , under 2 x 600 viperspctre LED full spectrum autos . growing white widow from dinafem. i have allready bought: 1. inside fan, 2. clay balls 3. carbon filter extractor fan with ducting 4. 1.5 x 1.5 indoor tent 5. wilma 10 pot x 6 litre 6. 10 x white widow seeds from dinafem i may grow using only clay balls or i may go with coco or i may go with clay balls at bottom & coco ( please advise for easiest grow & yield ) so, what else is essential ? what do i now need to get to start ? want to get on the road now !! cheers ......your input is very very much appreciated guys !! Edited February 15, 2018 by skorpio777 Link to comment Share on other sites More sharing options...
lildaveham Posted February 15, 2018 Share Posted February 15, 2018 You will need something to start the seeds in like rock wool cubes or root riots so they have a chance to establish a root system before you put them in the Wilma system. good luck! peace. lil d. 2 Link to comment Share on other sites More sharing options...
JamJar Posted February 15, 2018 Share Posted February 15, 2018 Heat source? Atb JJ 2 Link to comment Share on other sites More sharing options...
Jibba jabba Posted February 15, 2018 Share Posted February 15, 2018 Nutrition, which is feed, temperature humidity sensor with min/max recording,a ec & ph meter,(depending on Nutes) circulation fan,(s) intake fan,filter, Heat mats/tubes, I believe that covers most of it, good luck.Jj 1 Link to comment Share on other sites More sharing options...
skorpio777 Posted February 15, 2018 Author Share Posted February 15, 2018 9 hours ago, JamJar said: Heat source? Atb JJ haha ...heat source i have : 2x 600 watt LED ( viperspectre full spectrum ) Link to comment Share on other sites More sharing options...
JamJar Posted February 15, 2018 Share Posted February 15, 2018 You may neeed more than that. 3 Link to comment Share on other sites More sharing options...
HornyHaggis Posted February 15, 2018 Share Posted February 15, 2018 (edited) You'll need timers for the lights, fans etc and possibly a humidifier. I just cant get it up !!!! and when i do get it up, i cant keep it up !!!!! OOOOO ERRRRRRRR Meant humidity ya durty bunch Edited February 15, 2018 by HornyHaggis Link to comment Share on other sites More sharing options...
skorpio777 Posted February 16, 2018 Author Share Posted February 16, 2018 (edited) 9 hours ago, JamJar said: You may neeed more than that. hi ive been told countless times on here that 2x600w is more than enough light in a 1.5x1.5 tent dont think i could fit 3 in there anyway.... what would you recommend ? i seen a COB led yesterday for a couple hundred quid ....tempted !!! Edited February 16, 2018 by skorpio777 Link to comment Share on other sites More sharing options...
skorpio777 Posted February 16, 2018 Author Share Posted February 16, 2018 is inlet fan essential ? i allready have a fan at bottom of tent plus a carbon extractor. growing in ;large room with window open a little Link to comment Share on other sites More sharing options...
JamJar Posted February 16, 2018 Share Posted February 16, 2018 @skorpio777 i was talking about heat source not lighting.. you may need a oil rad to keep ur temps up during lights off? 4 Link to comment Share on other sites More sharing options...
skorpio777 Posted February 17, 2018 Author Share Posted February 17, 2018 (edited) On 16/02/2018 at 10:41 AM, JamJar said: @skorpio777 i was talking about heat source not lighting.. you may need a oil rad to keep ur temps up during lights off? under LED so not much heat from them anyways, im growing in an upstairs apartment and its allways warm. but if need be to keep temps up do i put the oil radiator inside the tent ? or outside or does it even really matter ? cheers Edited February 17, 2018 by skorpio777 1 Link to comment Share on other sites More sharing options...
JamJar Posted February 17, 2018 Share Posted February 17, 2018 I would get a cheap thermometer with a probe sensor. U can get them off the auction sites for under a 5er. Stick that in ur medium so it will give u a more accurate temp reading of ur roots. Without a blanket my root temps are usually quite alot lower than my ambient temps. With the electric blanket the root temps are always stable. There are tons of options to keep ur roots warm. U want to be aiming for around 20-23c but dont quote me on that Atb JJ 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now