The dimensions are 1.8 metres wide 0.9 metres deep and 2.2 metres high.
I made the framework with 2 x2 and lined it with a thin sheet of mdf which i covered with mylar. I have insulated the floor, ceiling, doors and walls with 50 mm kingspan.
I lined the floor with some hardwood flooring i had lying around, should make life a bit easier when cleaning.
I couldnt find any decent small oscilllating fans , so i made the ones you see from some p.c fans which i have put on a dimmer so they arnt blasting plants to much.
Theyre is 2x 5 inch fans for inlets which are running on a dimmer . and 2x 6 inch fans for extracting, they are running through a sentinel controller, which runs themon low speed unless things get too hot. i have only mounted the filters inside the actual room, all the fans are mounted up above the room, im using insulated ducting all round as sound is a bit of an issue, if not only in my own head.
There is also 2 tubular heaters running on a b&q plug in thermostat.
Lighting wise is to be confirmed, i need to grab hold of a light meter to see which shades are performing best in this room, but at the minute i have 2 adjust-a-wings, one white and one dimpled aluminium.
I plan on using 2 600s however with the room being fairly small that might be too much, if so 2 400s or 1 600 on a mover, i shall find out which combination works best as we progress.
All i have left too do is hook up the extract fans and wire them to the controller, oh and make some room for some plants
.I plan to grow organically in compost, oh and mainly sativa plants
20-50 rooted cuttings put straight on to flower should do the trick me thinks. ill keep you posted.
nice looking setup ther m8 hope all go's well with your first grow.happy herbing.boobiesxxxx
