I placed my grow inside an IKEA closet of 1m x 58cm x 2,36m. I divided the 2,36 height in two floors: I use the bottom one for flowering, it is 1,56m height. The one on the top is 80cm height; this is the vegetative growing area.



This is the first floor, where I place my plants for flowering. Currently I have 3 Mazar (Dutch Passion) and 5 Super Silver Haze clones flowering there.

[attachmentid=125243]

Here is a closer look at the clones...

[attachmentid=125244]

And also a closer one of those Mazar girls...

[attachmentid=125245]

The light here, on the bottom floor, is a SYLVANIA 600W HPS into a COOLTUBE + RVK125.



And this is the growing area, on the top...

[attachmentid=125246]

nice setup mate

Got any distance shots covering the whole drobe??

Another pic of the vegging area...

[attachmentid=125247]

Clones here, on the right of this same floor

[attachmentid=125248]

The light here is an AGROLITE 200W CFL.



This is my second grow, the following pics are from my first one, 4 Mexican Sativa plants (Sensi).



[attachmentid=125249]

[attachmentid=125250]

There is so little space there I cant go back enough to get the whole thing inside the focus

no worries

looks impressive mate

Thanks aitchy1

[attachmentid=125252]

Cool set up, dude. I got a simillar set up to yourself, there.
Good old Ikea, eh.....

I use a 3 door.
The two door part is around 1m wide and 1.8m tall, this is where I flower.
The single door section is obviously the same height and depth as the two door section but around 60cm wide this is used for mothers, clones and a section up top housing my input fan.

I notice you aint got any duct on the end of your cooltube, I presume you are sucking through the tube?
How are you scrubbing your air?
How is your temps, running it that way?

Thanks Haggis123

Yes, the COOLTUBE is sucking hot air from inside the closed. Fresh air comes from a small window in front of the closet, pushed by a fan. This is temporary; I plan to buy another RVK (a more powerful one) to use as air input. Any idea on how this input air can flow thru both floors without causing light leaks from one floor to the other?

Now, in winter, temperature is somehow controlled: With the doors closed, temperature in the flowering area goes up to 30ºC… But I presume I wont be able to grow on summer: My apartment is on the top floor of the building; Sun hits all along the day on the ceiling, with 30ºC to 35ºC as normal temperature without lights or other devices turned on.

[attachmentid=125301]

I have no temperature issues on the vegging area; The light there is an CFL which gives almost no hot. The only problem was the low temperature during night time, which seems to affect rooting seeds and clones. I have bought this electrical blanket to put it under the cloner, and now I'm having much success with this.

[attachmentid=125302]

[attachmentid=125303]

[attachmentid=125306]

I also use this thing to keep humidity under control

[attachmentid=125307]

I don't know wether this scenario would be any good for you but when you get your second fan to cool the cool tube you could have it set up so that the warm air from the cooltube is blowing through ducting into your top section and have some holes drilled so that the warm air can escape.
It shouldn't cause any problems with light leaks as veging plants aint too worried about interupted dark periods.

You would have it set up something like this :- Fan (drawing air in) - ducting - cooltube - ducting (connected to top section) - drilled holes for air to escape.

Forgot to ask, what is the humidity thing you are using? Where did you get it and how much ?

Its name is BONECO 7131 ULTRASONIC HUMIDIFIER, around 90€
"This ultrasonic humidifier uses high-frequency vibrations to turn the water into a micro-fine mist which is blown into the room, where it immediately evaporates. Ultrasonic humidifiers consume very little power. A replaceable demineralisation cartridge ensures hygienically pure water mist without limescale or mineral residues."

Thanks for that, may try and find one in the U.K as vegging rooms RH is a bit low and this looks like it will do the trick.

looking tops dude nice looking plants what strain ?

The ones on flowering are 3 MAZAR (DUTCH PASSION) from seed, and 5 SUPER SILVER HAZE (GREENHOUSE) from cuttings. Here is a pic of one of those MAZAR.

[attachmentid=125870]

This MAZAR plants have a nice size for a small setup like mine; Like 60cm small christmas tree.

I got the SUPER SILVER HAZE clones from a friend; The clones are now almost twice the size of the MAZAR plants!

There are also 2 WHITE RHINO (GREENHOUSE) and 1 JACK HERER (SENSI) on the vegging area. I'm using these 3 plants as small mothers, keeping them somehow short and taking clones from time to time. By now, I wasn't able to clone any of the WHITE RHINO ones… All cuttings from this plants die About the JACK HERER, all cuttings from this plant root perfectly with a current 100% success ratio.