Hi all,
Here are the new modifactions to the original Stealth office growcabinet (because of file size pic on each post here)

1. New CF 160 4 inch carbon filter fitted with chain to hooks. [attachmentid=67473]

2. Full acoustic ducting fitted and sealed to upper chamber [attachmentid=67474]

Looks the bizz BU..no more smell now uh

3. 4 Inch centrifugal fan fitted (Vent-Axia, cheap from E-bay, works amazing, and really quiet) hung on bungie cords. [attachmentid=67475]

4. Full cabinet shot with added compact fluro for additional lighting. let me know what you think.

I am going to modify the intake (flap of some sort and use the PC fans to blow over the plants to strengthen them.[attachmentid=67476]

loookin good

Very neat and tidy set up hope it works well for yer.

Cheers all, working great.
The 4 ladies (cinnamon) have just been tied down, they grow pretty quick these girls.

Here is the new passive intake.

I have fitted a 5" bracket and connected ducting to blow into the heart of the grow (I have put fine mesh at the intake hole to stop any nasty stuff getting in)


[attachmentid=67589]

And here is the new mini osilating fans that I have made up from the old PC fans that I used before.

These are constantly on (using a multi voltage PSU running @ 4.5v) so there is a nice constant breeze in there to blow the heat away from the plants and generaly circulating the air.

[attachmentid=67591]

And here is the new Intake and fan system in full, plus a good pick of the girls tied down.

Any feedback appreciated!

[attachmentid=67592]

crackin neat job there mate,looks great.oh ye,"wach your bass bins im tellin ya".that a blast from the past,think ive got that on a old mickey finn tape 90,91.cant get it out me head now ive got to go and find it out

Very nice! You won't regret it if you get some easy rollers for lowering and raising the light, though - they're a godsend

Easy rollers could be an addition to V3.0 maybe

How have you light proofed the doors?

Hi Grow Monkey.

I light proofed the doors with sticky door excluder all round the door opening and the door itself

Here it is fitted up to the top of the grow area on the door side and more on the top of the grow area (they fit tigether and make a light and air proof seal)

[attachmentid=67806]

and here is the bottom of the left door and the bottom of the grow area

[attachmentid=67807]

Hope this helps.

Here is the latest addition to the grow area, a SCROG net.

Ladies now on 12/12 for week and a half now

[attachmentid=68616]

Still got your industrial jumpsuit, white gloves and facemask? I wonder what Altern8 are doing now?

Yeah, they were the days! It was great at the time but I think I have chilled out in my old age. Im more into my Boards of Canada, Plaid etc now.

nice work thanks for the pics Big Url. what is your main lamp? is that little flouro going to make a difference?

great job mate. im doing some mods on my slumberland today and im inspired by your efforts and am now thinking about doing some tying down and scrog net action myself

Felon

very tidy indeed . i'm still waiting for my fan and filter from shitbay and i'll be getting my drobe sorted out for the next grow so no stinks this time

lookin forward to it Barry

There is a 125W red Enviro with a 20W compact fluro for additional light (blue) more to be added soon.

"watch yer bass bins im telling ya"

AHH THE GOOD OLD DAYS

i "used "to dj a bit of breakbeat

OLD SKOOL these dayze

cool lookin system there mate

Cheers dude. I like my breakbeat!!

Nice Grow room mate, well impressed! Keep up the good work, i'd personally put your light higher but, N/M!!

well done, keep up posted!

Doubt I could manage a 15 min set let alone a 2hr stomp these days. Anyone here ever go to Double Dipped at Bagleys in the 90's? Or Equinox up at Rushden?

As Dr GT said, you may run outa room in there but all tied down you might be OK. Looks lie you have a similar setup to me but I removed the shelf from my wardrobe to give some extra room.

Also I thionk someone mentioned easy roller thingys, check Wilko's if you have one near you, picked some up in there for £3ish

Don't want to mini-hijack the thread but I could do with some more of those - what section of the shop have they put them in? Good old Wilkos.

Ive got my Easy-rollers now,will post picks when received.

exellent looking drobe dude very nice and stealthy, roll on harvest time eh!!

New additions dudes!

New light fitted (23W compact Fluro 2700K)

[attachmentid=69784]

And another shot of the ladies (2 weeks 5 days on 12/12)

[attachmentid=69785]

Also a bit of sound proofing for the fan. Its not that noisey, but anything more to improve the stealthness is a good thing

Just simple bubble wrap fitted to inner skin of fan area of the doors.

[attachmentid=69786]

And a good bit around the fan, doesnt look as neat now, but works great.

[attachmentid=69787]

Hello folks, Ive been adding more kit to the cabinet.

A fan regulator.

[attachmentid=70685]

The fan is always on now, and its bloody quiet! My PC is louder!!! Im running it at about 1/4 speed, still plenty of air movement sucking out.

Its the B&Q one that a few folk have used on here, well worth the small outlay.

Cheers, Feedback welcome as normal.

Quick question dudes.

I have been test running this for about 3 hours now, temps are fine around the 20- 23c, the humidity is about 30%, is this to dry, or will it be fine????

cheers

I have now added a few pest controls into the grow area.

1. Sticky fly pads, I have noticed a few tiny black flys buzzing out of the grow when the doors open. Is this anything to worry about?
[attachmentid=71030]

2. I have also added a Sideshow Bob to keep an eye on things. Im am wondering if he is the best choice of Simpsons character to use, or should I upgrade to Family Guy members?
[attachmentid=71033]

No stick with sideshow bob, he brings abit of class to the grow
Unless you have enough space to stick in brian as well

Perhaps its all the mylar but those pic look stunning and the plants don't look half bad too

How did you get the PSU to run without a mobo? I want to use a couple of PC fans in my grow, i've got an old 250watt PSU and a couple but i don't know how to make it work without a PSU.

Cheers
Reffa

I used a multi voltage PSU, stripped the ends and wired it up to the PC fans. Places like Maplin sell these. I am running them @3v just now for a gentle breeze in the grow.

[attachmentid=71045]

Cheers,

I see what you mean now, don't bother fucking around with computer PSU's.

Good luck with your grow, when i get round to it i'll post a grow diary

Thanks again
Reffa

No Probs

Ive added these soil protectors to see if it will stop my little black fly problem. Hopefully this will stop any larvie being left in the soil and the sticky pads to catch any fully grown ones. good idea?

[attachmentid=71104]

Hey dude the grows looking ace but on the character front i'd suggest that you get a stormtrooper in there sharpish to keep an eye on proceedings because its a well known fact that fly's will soon feck off if they are told that this is not the grow they were looking for and to move along [attachmentid=71110]

More additions dudes.
2 new mini compact fluro bulbs (18W, 1100 lumen 2700K each) the way they are fitted is just temporary until this grow is finished, then the shade will be modified. These are to sort out a bit of a dark patch around the ballast area of the enviro. Works great for a good even spread of light now.
[attachmentid=72336]

Here is a pic of the full light set up.
[attachmentid=72339]

This is the junction box fitted inside the grow chamber to power the 2 new lights from the mains cable.
[attachmentid=72340]

Right folks, its time to tweak the stealth cabinet again ready for the new grow, which is Femaleseeds.nl X - line, Northern Lights X ICE (sounds yummy!) diary for this to follow. But first.......

1. New light fitting holes for the compact fluros.
[attachmentid=82474]
[attachmentid=82475]

[attachmentid=82476]

2. And an extra 5" passive intake port, and moved the mini fans to the centre for internal air flow.
[attachmentid=82477]

A quick addition to the grow space. I have added another 2 fans for air movement angled to the base of the current grow. I still have to fix them to a permanent location, what they are fixed to is temporary.
[attachmentid=89669]
Cheers

BU

just read all 5 pages and thought to myself... thats a nice well made drobe.

and quite to!

This is how we do it!

BH

Cheers BH Its working pretty well.

Peace