first up the extraction system,a good old td160 and a homebrew carbon filter

theres a nice gap between the roof and walls were the fan extracts to
couldnt think what to use to seal the ducting ends until i spoted a traffic bollard
lighting is taken care of by 4 x 70w sodiums,they were being throwen out at work so the price was right,mounted the enclosures in the loft

the cables from the ballasts to the lamps are covered in high tempreture sleaving,rated at 5kv.

also from above is the feed for the enviro and the earth for the reflectors,the sash cord is for rasing/lowering the lights as required
the reflectors are screwed to a wooden frame,the enviro is held ito it by a few cable ties

to avoid any mess from exess water i made a "swiming pool" from plastic sheating,


