Help - Search - Members - Calendar
Full Version: Easy Hash?
UK420 > Cultivation > Harvesting and Processing > Hash & Oil
rocky
lo
How can regular joe blogs make hash an easy and effective way with little knowledge/experience in making hash and get some decent results using his homegrown plant. Taking into account a very very small budget (0 if possible)

which bits of my plant can i make hash from
what ways can i make hash?

id like not to hav to purchase expensive equipment.
thnx

rocky
pd666
rocky im looking into this aswell as i have alot of trim from my harvest im going to try the butane gas method for hash oil by using a 1 12/ ft piece of copper pipe with one plastic cap on the top with 1 hole drilled only big enough to fit the gas nossle in then for the bottom make stuff the cap with cheap toilet papet then add many holes in the bottom cap tape the bottom cap on tight really tight then the top tape it on aswell but not to tight ud rather have the top blow off than the bottom of ur pipe mono hash thread in hash oild production in hash making forum mono posted all the instuctions step by step top advice m8 look it up


peace pd666
Mono
lol.gif...do you mean ...this thread...?

Mono...x
pd666
top guy lol.gif im just a tad to monged to be working this thing lol.gif
rocky
ta m8.

but thats oil, wot about hash?

rockj
pd666
for ur best result for making hash is bubble bags ull get the most out of your trim and any air bud u process u can buy them for around 100 pounds i think the uk420 shop might do em ? but the hash u end up with is fooking awsome clean as fook
rocky
good plan, major floor:
QUOTE
u can buy them for around 100 pounds 


next idea?

rockj
Dr.Green.Jnr
get yourself some silk/printing screens from an art shop, build some frames from wood, stretch 'em tight, fix the screens. all the material can cost less than 15quid if you shop around. get screens of 230/220 micron, 190/160micron, and 75/60 micron for the least cost possible, although im sure people would argue with me about this, these are the essential sizes. simple take your trim, let it dry out, then place the screens on top of each other in 230/190/75 order top to bottom and havea mirror or other flat surface beneath them. put the dried trim on the top (230) screen, and 'agitate' it, this involves moving the trim around the top of the screens, either by shaking, hand or a tool. keep agitating the screens until you get a golden power on the mirror below, scrape this up and use either foir smoking raw as kif (let not have that arguement) or compress it by hand rubbing or other method (shoe hash style or bubbleman heating style) and some as raw hash, or leave it for a few months in a cold dark place in a tupperware container and smoke some fine matured (well, for as long as stoners can wait) hashish.

its just the old dry sieving method, people have been using for centuries. the old ones are always the best, and the resulting product can be compared to a morrocan or afghan as theyre mainly dry seieved.

you could opt for the coffeegrinder hash, but really dry seive will get great results with very little outlay.
Butty
Alternatively..... If all you want is cheap and easy, have a look at the hand held hash maker at the bottom of this page I've had one for 12 months and it's an excellent little tool. All I do is get my trim and bottom bud crispy dry, crunch it up a bit and put it in the tumbler with a small glass bead (to act as an agitator) then pop the whole thing in the freezer for a half hour or so, then a couple of minutes of furious shaking and tapping and you've got yerself a nice little pile of powder, tip this out onto a mirror or similar and then just press it all together into a nice little ball (I can get anything up to 2g a time) and skin up!! P.S the longer you shake the more impurities get through (leaf matter) so after a few minutes shaking, harvest whats in the collector then pop the tub back in the freezer for 15 mins or so and shake again......keep doing this until you start to get a green tinge on your end product.
Good luck stoned.gif
rocky
anything like that i can do without buying something?

thnx for all ur help guys

rockj
Butty
Yeah is the simple answer to that, all you need is some kind of drum-like object, open at least one end and a pair of womens tights oh yeah and some tape or summat to fasten the tights down.
Using a biscuit tin as an example (biscuit tin is good 'cos one end is shut allready), get your trim etc (crispy dry works best in my experience but others may argue the toss on that) and place in tin. Now get your nylon tights (we know yer've got 'em ph34r.gif ) stretch over the open end of your tin and secure with tape (elastic bands?...whateva) now, place the tin, tights side down, over a large bowl or summat.....anything that'll catch the skuff (failing that a large sheet of clean white paper) Now fer the fun bit....get a couple of wooden spoons or whateva and beat the shit out of the bottom of your upturned tin....keep going for about 10 mins and collect your skuff....press it skin up and have a spliff while you give the tin another 10 mins of beating,repeat until it starts coming through green
Oh yeah....freeze your trim before you start....works much better.
And now....here's one I made earlier 1eye.gif
rocky
sounds like a plan, thanks m8!!

biggrin.gif

rocky
Woody

Got this from overgrow, hope it helps, peace.

High Everybody,
I just wanna show the people who's harvest comes at a time when they can't afford other methods,(like myself) the cheap way that I make a little hash from the trimmings I'd ordinarily throw out. So here goes.

First pic is of the ingredients you'll need

1 - 32oz clean mayonnaise jar.

2 - The coldest water that you can get (I take cups filled w/ water & put
them in the freezer 30 minutes before I start)

3 - 1 coffee filter basket w/ a coffee filter in the basket

4 - Roughly 1/8 - 1/4 oz. trim (Believe me that's all that will fit in the jar)

5 - (Not shown - too stoned) - a tablespoon for spooning out the weed.


Step 2
Fill the jar about 2 inches from the top with the water (I always throw in 3-4 ice cubes - helps keep the water cold & adds a little abrasiveness to the trim.)

Step 3
Fill the remaining space in the jar with your trimmings.


Step 4
Shake violently for 30 minutes.


Step 5
Let it Settle For 30 Minutes, roll & smoke a nice big spliff from the buds this trim was from to pass time.


Step 6
30 minutes Later the waters not as cloudy and you can see the trichromes on the bottom.


Step 7
Open the jar & use your tablespoon to remove all of the weed (this is what takes the time but GET IT ALL OUT).


Step 8
After weed is removed it may look like crap but boy will it bring you happiness.


Step 9
Hold the coffee filter basket in one hand and slowly pour the water into the filter basket.


Step 10
Remove the remains from the coffee filter and leave untill dry. An inexpensive and easy way to get a nice couple of hits from some otherwise trash for yourself & a friend. After all that's what stoners are all about,sharing.


ubiquity
QUOTE (stoner_boy @ Sep 2 2003, 07:38 PM)

Step 7
Open the jar & use your tablespoon to remove all of the weed (this is what takes the time but GET IT ALL OUT).


Step 8
After weed is removed it may look like crap but boy will it bring you happiness.


Just to clarify, after step 8 what do you do to the weed thats looks like crap? Do you smoke as well as other stuff that is dried out on the filter, or just throw it away?
Woody
i guess you'd just chuck it m8. i don't think you could do anything with it, but i could be wrong u could always try it!

i don't know my self because i haven't done it yet but if you try it give me a shout on the results,

Peace and happy tokin stoner_boy! smoke.gif

P.S i don't know how to make a link but if you want to check it out on overgorw.com go on growfaq and then advanced topics and second to top is hashish and oil click on that and then on Bunzboys 10 steps for the cheapest way to make hash and there u go.

bigcheggs
the link

gotta take my hat off to you stoner_boy for typing all off that in. toot.gif

for future reference my friend simply copy and paste the web page you want to add as a link, then click the http:// button in reply page, paste the web addy into the box, click ok, then you can add a script or header to your link, click ok and that should work, as an example i have got your link and called it the link(sunday has never been good for me and my originality)
peace............bigcheggs ph34r.gif


p.s. any probs give me a shout so as i can vehemently clover.gif deny ever knowing you lol.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2010 Invision Power Services, Inc.