[Viva]

My whole rig was 615 dollars including postage, The rig is Made by N3RD. loving it already .

[Wretchy]

The Villain, on 24 February 2012 - 03:21 PM, said:

How much was that set up Viva ?

Don't ask!!! Good to see it came safe and sound Viva

E2A: Didn't see viva's reply it snuck onto page 2

This post has been edited by Wretchy: 24 February 2012 - 05:27 PM

[Shogun]

La Viva Sativa, on 24 February 2012 - 04:23 PM, said:

My whole rig was 615 dollars including postage, The rig is Made by N3RD. loving it already .

jesus, i like my glass but $600+ is a lot of money. i just paid $120 for this, its made by eric from 'a glass work orange', its 9" tall with a lowered inline gridded diffuser. he's also making me a glass on glass bubber with worked sections and 2 downstems but i wont get that till april.
shogun

Attached thumbnail(s)

• 
• 

[Graywolf]

Jiffa, on 24 February 2012 - 11:18 AM, said:

Graywolf, on 24 February 2012 - 10:53 AM, said:

I use a plumbers propane torch to heat wands at home and carry a butane BernzOmatic torch in my portable kit.

any pics of your portable kit g

Here are some pictures of what we've designed and had made:

The pipe in the cardboard container, has interchangeable bowls and is used in class to demonstrate the different taste and effects produced by the different processes.

The wands shown are borosilicate, quartz, and CP Titanium.

PS: Our cost for the glass on glass tapers water pipe with the diffuser and oil well was $84 at a scientific glass shop.

Attached thumbnail(s)

• 
• 
• 
• 
• 

This post has been edited by Graywolf: 25 February 2012 - 12:35 PM

[Shogun]

Graywolf, on 25 February 2012 - 12:22 PM, said:

is used in class to demonstrate the different taste and effects produced by the different processes.

is used in class??? what class is that? think i went to the wrong school

[Graywolf]

the_shogun, on 25 February 2012 - 02:02 PM, said:

Graywolf, on 25 February 2012 - 12:22 PM, said:

is used in class to demonstrate the different taste and effects produced by the different processes.

is used in class??? what class is that? think i went to the wrong school

We periodically present a hands on class on seven of the extractions processes, with tasting of the result at the end, along with a sample of cannabis acetate. Participants must bring designated driver,

We have yet to give our own classes this year, as we are building a new extraction shack, but will be presenting a show and tell extraction class at NGF in Portland, at the end of next month.

[Elephant Face]

Graywolf, on 25 February 2012 - 04:26 PM, said:

the_shogun, on 25 February 2012 - 02:02 PM, said:

Graywolf, on 25 February 2012 - 12:22 PM, said:

is used in class to demonstrate the different taste and effects produced by the different processes.

is used in class??? what class is that? think i went to the wrong school

We periodically present a hands on class on seven of the extractions processes, with tasting of the result at the end, along with a sample of cannabis acetate. Participants must bring designated driver,

We have yet to give our own classes this year, as we are building a new extraction shack, but will be presenting a show and tell extraction class at NGF in Portland, at the end of next month.

I wish

[Graywolf]

Elephant Face, on 25 February 2012 - 04:35 PM, said:

I wish

What better reason for a vacation abroad?

[Elephant Face]

Graywolf, on 27 February 2012 - 10:30 AM, said:

Elephant Face, on 25 February 2012 - 04:35 PM, said:

I wish

What better reason for a vacation abroad?

I really would love to, but i have a caution for cannabis (is spent in UK but no such thing as spent in US i believe)
I think this makes me a void entry unless i lie on visa or apply to embassy or something like that. You cant enter US with any drug charges.

I am impressed by how things have moved your way, you guys really take this seriously and i respect that. was just looking at eden labs site (Impressive but pricy!

What are the seven processes if you don't mind me asking?

Which is your favourite?

Have you had them analysed to see what process creates the purest/strongest oil?

Thanks for your time

EF

[Graywolf]

Elephant Face, on 27 February 2012 - 08:06 PM, said:

What are the seven processes if you don't mind me asking?

Which is your favourite?

Have you had them analysed to see what process creates the purest/strongest oil?

EF

BHO fresh frozen and cured
QWET fresh frozen and cured
QWISO fresh frozen and cured
EToH reflux

BHO fresh frozen followed closely by QWET cured.

No, we haven tested yet, because testing was only recently available locally and they want so much money to do so, that we bought our own used gas chromatograph for less than the cost of 20 tests and hope to start doing our own soon.

[Elephant Face]

Thats my fav also, good taste and high.

Yep understand about the testing, can't beat the guinea pig test anyhow as science does not always agree with practice.

Sounds like you have fun

[Graywolf]

2hi2try, on 11 March 2012 - 06:56 PM, said:

Most people want to do stuff like jump from a plane before they die, I just wanna try bho acetate. If I'm ever in that neck of the woods I'll be round with my driver.

Do you fancy making a detailed breakdown of your butane reclaimer please Graywolf, my local supplier hadn't restocked when i went to see him this weekend and it made me realize its one of my biggest outlays atm. I'm sure it would make the whole process much safer to, I do a run every day so I'm playing the numbers game.

As Jiff said, look on amazon for a masterclass torch, a fraction of the price of a vector and just as much flame and when ya feeling pervy look out for a Hitman glass torch.

Give me fair warning and I will have tea and crumpets ready!

I will provide a detailed breakdown of the newest automated system that I am building, for any who wish to build one.

Except for drilling about a 1" hole in the center plug and lid, plus Tig welding a couples pieces of Schedule 40 304SS pipe in the holes, everything just screws together on a manual version of it, so they are easy to build.

As this unit is for a paying customer, with expensive tastes, it will be fully automatic, except for loading and unloading, and the automatic ball valve operators are huge, so it will also have some extra supportive framework, that isn't necessary on a manual system.

We will build our own electronics, and supply details, but it could easily be run with three timers, using three pressure switches, or a pressure transducer and a PLC. We looked at the latter and it was so much more expensive that we decided to build our own electronics, based on the simpler former approach.

Lastly, after getting prices back on my own from scratch design of a "cheap" pressure pot for mama and papas, I bought a damned expensive one off the shelf for less money. Because it is so damned expensive, you might search for a cheaper solution for the equivalent lower stainless 120 psi ASTME pressure pot in Europe.

I considered buying just a steel pot and having it stripped and nickle plated as another alternative.

I'll update my thread on the subject, but if I forget, you can always find current status here:

http://skunkpharmres...h.com/projects/

This post has been edited by Graywolf: 12 March 2012 - 10:50 AM

[Freda Weed]

excuse my ignorance but how do you actually smoke the oil?

do you dab a bit on the wand and then heat it somehow?

I've seen a few vids but it doesnt make sense to me.

And given that its only a semi solid anyway wouldnt it make more sense to vape it or is that too tricky?

ta peeps

peace

[Shogun]

Freda Weed, on 12 March 2012 - 12:59 PM, said:

excuse my ignorance but how do you actually smoke the oil?

do you dab a bit on the wand and then heat it somehow?

I've seen a few vids but it doesnt make sense to me.

And given that its only a semi solid anyway wouldnt it make more sense to vape it or is that too tricky?

ta peeps

peace

you heat the little glass nail with a torch then dab the wand on the red hot nail. im not sure if you can use oil in a vapourizer, i think it might be too messy.