Why waste £100's on a wilma system that to be honest doesnt give you much room between your pots so lets make our own ...
You will need as follows
1x resivor - must be deep enough to hold good 30 litres of water and must be strong enough not to buckle under the weight of water or ya groom will look like a swimming pool
1x tray - this is to stand your plants on it must be deep enough to stop water going over the edge if you havent put enough drainage holes into it i used a 6mm drill bit for this and i used a 13mm bit for the big hose to the pump
some hose and connectors ya can use just garden hose but ive gone for 4mm black hose as see though gets algea growing on the inside which is just an ivitation for black fly as i found out..
ok so you have all your parts now its time to put it all together . get ya res place it down on the floor then get ya top tray you have put your drainage holes in and attach your pump and main hose on it like so...
then all you do is get your plants attach the small bit of hose to the pump then drill small hole on the side of the pot so the hose can go through it and keep it in place
the rest is easy enough to figure out i guess, if not questions will be answerd peace and buds.. B2T
Edited by born2toke, 07 January 2011 - 10:50 PM.