Jump to content


Photo
- - - - -

scrog net height


  • Please log in to reply
6 replies to this topic

#1 bonnie123

bonnie123

    Full Flower

  • Senior Member
  • PipPipPipPipPip
  • 1356 posts

Posted 08 August 2010 - 07:05 PM

hi guys as title what height do you normally set your nets
on a quest for pain relief

#2 _Logik_

_Logik_
  • Guests

Posted 08 August 2010 - 07:11 PM

Not sure there is really a hight, just make sure you leave enough room so that you can bend out the branches and spread them along the net to fill it up.

Mine is very low and I started topping and supercropping from the moment it was possible, so my scrog is very horizontal

#3 flip70

flip70

    Shitfaced

  • Senior Member
  • PipPipPipPipPip
  • 1603 posts

Posted 08 August 2010 - 07:11 PM

Hi mate.

Mines set to around 10 inches.

Plenty of room to get my arm in there for bending and such.

ATB
Flips 1st Scrog

http://www.uk420.com...w...t=0&start=0






Strangers passing in the street,by chance two seperate glances meet,and i am you and what i see is me.
Do i take you by the hand,and leed me through the land,and help me understand the best i can...

#4 bonnie123

bonnie123

    Full Flower

  • Senior Member
  • PipPipPipPipPip
  • 1356 posts

Posted 08 August 2010 - 07:15 PM

thanks lads for the quick responces cheers
on a quest for pain relief

#5 lazi

lazi

    Resin Coated

  • Senior Member
  • PipPipPipPipPipPip
  • 3539 posts

Posted 09 August 2010 - 09:33 AM

Set the screen at a comfortable working height for you and work out the height of the growing floor/tray from there. (1m/0.5m in my case.) No point bending too much and risking back pain when it can be avoided with a little thought at the planning stage.

#6 bonnie123

bonnie123

    Full Flower

  • Senior Member
  • PipPipPipPipPip
  • 1356 posts

Posted 09 August 2010 - 01:27 PM

Set the screen at a comfortable working height for you and work out the height of the growing floor/tray from there. (1m/0.5m in my case.) No point bending too much and risking back pain when it can be avoided with a little thought at the planning stage.



hi lazi do you mean you set trays at 1 mtr and ya net 0.5 above the trays
on a quest for pain relief

#7 lazi

lazi

    Resin Coated

  • Senior Member
  • PipPipPipPipPipPip
  • 3539 posts

Posted 09 August 2010 - 03:36 PM

Other way round, trays a half metre from ground, screen a full metre from ground.

1M high screen is just below belly button height for me, works ok.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users