[rellik]

so i was lazy
and it cost my plants health

but light and filter are in
heres how i hung filter

Attached thumbnail(s)

• 

[rellik]

a boring shot of electrics my contactor and el cheapo timer

Attached thumbnail(s)

• 

[rellik]

and even more boring
a piece of duct into loft

just to show my ducting is less than one meter to the fan
but almost perfectly straight
because its a budget setup

fan sits upright on top of 12-14" of rockwool
with more rockwool draped over to deaden sound

my intake i think is too small
its roughly 3" x 5" square (input please)

have good NEG. Pressure (too much??)

also got velcro and hooks for filter from wilkos so another £4 spent
i did what Cannabisking suggested
put velcro in little squares and it works a treat

Peace

Attached thumbnail(s)

• 

[CK.]

Looks awesome to me, DIY is never boring mate, LOVE that filter hanging malarky too, nice straight line to the fan, wish I could do that

Scrap the intake mate, I haven't got one, I just cut a hole in the side and put one of those sliding vents over it, have you got a fan controller, ya can get a really cheap one on fleabay for about 7 quid, ya just plug ya fan into that then that into the socket, it has a little dial to control the power to the fan so you're in control of temps and how much neg pressure you have... of course just ignore me if you're already on it like

Any plants yet mate?

ATB

CK

[rellik]

problem is its 30oC hi
so couldn't turn fan down if i wanted to

think im going to add another intake or two
and yes i have some ladies in
though they look though they've done 10 rounds with tyson

[CK.]

Thing is mate cos you're using a passive and ya in a bedroom if the temp of that room is warm then no size intake will improve that, ya either need to get some ducting and intake from a window, purchase an air con unit or upgrade ya extraction?

Bank manager says ducting mate

Re ya plants, I showed ya mine haha

CK

[rellik]

I agree
well i been running with just the window vent open.
opened the window onto the 'just cracked' setting.
so we'll see how that goes
there is another window i could do this to also

dont really want my window open when its cold out
it looks odd (nosy neighbours)

have updated my sig now im allowed more links

This post has been edited by rellik: 22 February 2012 - 09:02 PM

[rellik]

Got the ducting in a few days back and it dropped temps to 28 max
dropped to 18-19 min

not so bad i think
just incase anyone was wondering
PEACE

[CK.]

It shows mate I noticed as soon as I seen them in their nice new pots

Let me tell ya mate, weed will grow in most places, but in the right environment....

[rellik]

so happy with how things are going i wanted to put this picture here

Attached thumbnail(s)

• 

[CK.]

Now ya showing off

[rellik]

well yeah, but im sooo proud of them

ETA realised i ain't shown my light trap/intake so ill take some pic when i remember

This post has been edited by rellik: 19 March 2012 - 08:52 PM

[bluecheese1]

looking good rellik

the only things left to do is to move your electrical stuff up off the floor & mount
them to a board & screw the board to a brick wall, preferably above waist height

This post has been edited by bluecheese1: 19 March 2012 - 11:34 PM

[rellik]

cheers bluecheese

yeah they are off the floor on a wooden rack
should try get them on the wall really

nightmare where i am in a maisonette
any noise travels - so don like drilling if i can help it

i hear my neighbours convo's and have to stick headphones on

thats why the fan is in the loft
glad i got the upstairs really

peace

[Joint hogger]

Mounting aa board to the wall is easy, a couple of wooden batons (2"x2") then a bit of wood for the mounting board.

heres a few ive made up & theyre all still working great

......