The problem with my equation is that it assumes your pots are cylindrical and not tapered. If you want an exact size what ya have to do is measure diameter at the top of pot and at the bottom of pot add them together and divide by 2 and then use that number halved again to give you your radius. Really wish I was better at explaining things, sorry guys hope you can figure that out.
pot size litre to cm
#17
Posted 23 April 2012 - 01:01 PM
There is an online calculator that will work for plant pots, it calcualtes the volume of a 'slice' of a cone, which is exactly what a plant pot is.
I sealed the bottom of one of my pots with clingfilm then filled it with water and it held 5 litres.
I then plugged my numbers into this calculator and it told me the pot was 4.843 litres so that's good enough for me.
All you need to do is type in three things :
1. The radius of the base, this is the radius of the top of our plant pot.
2. The radius of the top, this is the radius of the bottom of our plant pot.
3. The height of the pot.
Don't forget to set your units (cm, inch, whatever) before doing the calculation.
http://www.aqua-calc...-truncated-cone
This seems the easiest,. most accurate way to me.
Cheers,
nibs.
I sealed the bottom of one of my pots with clingfilm then filled it with water and it held 5 litres.
I then plugged my numbers into this calculator and it told me the pot was 4.843 litres so that's good enough for me.
All you need to do is type in three things :
1. The radius of the base, this is the radius of the top of our plant pot.
2. The radius of the top, this is the radius of the bottom of our plant pot.
3. The height of the pot.
Don't forget to set your units (cm, inch, whatever) before doing the calculation.
http://www.aqua-calc...-truncated-cone
This seems the easiest,. most accurate way to me.
Cheers,
nibs.
Experience is a hard teacher, it gives the test first and the lesson afterward.
Grow 1.
Grow 2.
Grow 3.
Current Grow.
Grow 1.
Grow 2.
Grow 3.
Current Grow.
#18
Posted 01 May 2012 - 10:27 AM
george1, on 27 March 2012 - 02:06 PM, said:
I think the best way to find the volume of your pots is to put a plastic bag inside a fill with water
I cant believe this thread is getting this big!
Its not an exact science when choosing pot sizes - its a rough idea and the plants wont complain if there's a litre or two short.
Just use the very simple method above and get a rough idea.
#19
Posted 01 May 2012 - 10:30 AM
Ye, well, all of us men like discussing numbers 
And YOU just made the thread even bigger, and caused me to reply to it, making it EVEN B I G G E R !!!
Cheers,
nibs.
And YOU just made the thread even bigger, and caused me to reply to it, making it EVEN B I G G E R !!!
Cheers,
nibs.
Experience is a hard teacher, it gives the test first and the lesson afterward.
Grow 1.
Grow 2.
Grow 3.
Current Grow.
Grow 1.
Grow 2.
Grow 3.
Current Grow.
#20
Posted 01 May 2012 - 01:26 PM
#21
Posted 17 September 2012 - 03:11 PM
are we measuring up to the compost line or the whole pot?
But cheers for that OP
RB
But cheers for that OP
RB
#23
Posted 17 September 2012 - 09:59 PM
I've just read the label and it says what litre the pots are on them. Well in b and q it does anyway
.
#24
Posted 23 November 2012 - 10:05 PM
Glad this helped, wasn't expecting this much intrest in the thread. I did my head in trying to work this out

Help











