it has a crappy TT fan at the end that's not needed now intake temp 20c canopy 28c but when the TT is on it drops to 26c
Veg tent is DS60 250w CFL 4" extraction in to same room as intake + intake of above...passive intake.
Due to the light spread of the cool-tube I struggle to do 6 plants, and I smoke that too quick....
So ive been looking to get a DR80 250W HPS kit/ducting(more holes:()/another rvk to sit at the end of the 10
meter distance to the exit point....and scrap the veg tent totally...and put 4 plants in this.
Doing autos and ill have 10 plants...but running 4 RVKs more holes and a few hundred quid lighter - and the cost of running
two heaters etc
Got me to thinking - and I dont know about these things - If I scrap my 400w and cool tube and brought an coolstar
and a 600w to put in my DR90, in theory I could get 9 under there and replace the exit point extraction from the TT to another RVKHP.
bring down temps more. but not an option is spending 300+ on a 6"CF and new fans when the ones I have are only a few months young
The thing is ive researched and seen people say DR90 with 600W is possible with 6" extraction as is 5" with a 4" intake of coldfreshair.
Neither is possable right now.
But found no info about a CF-4"RVKHP--Coolstar600w--10mtr--4"RVKHP--out.
To be fair sticking a 600w in there is no cheaper than geting 250w and kit...so go safe? or not? but 600w single gives more space
and less electric use on peripherals.
What would you do? think I could get away with it? Ta
This post has been edited by Raineh: 26 April 2012 - 10:35 PM